Cap Coder
Cap Sealing Machine
Product Description
Capping Machines:
Cap Coder manufactures a range of Capping Machines for all types of applications,
from simple bench top cap tightening applications to complete fully automatic filling,
plugging and capping operations.
from simple bench top cap tightening applications to complete fully automatic filling,
plugging and capping operations.
Cap Coder can also supply their torque heads for customers and machine builders
to incorporate into their own capping equipment.
to incorporate into their own capping equipment.
All machines and equipment are manufactured to ISO 9001-2008 build standard
and CE marked.
They are also supplied complete with a Certificate of Conformity / Incorporation,
depending on the application.
and CE marked.
They are also supplied complete with a Certificate of Conformity / Incorporation,
depending on the application.
CC1160 Automatic Filling, Plugging & Capping Machine:
The original design concept for the CC1160 machine was as an automatic filling, plugging and capping machine for small containers, typically used in the laboratory, aromatherapy, pharmaceutical, cosmetic and diagnostic sectors.
However, due to the `Modular` design approach taken by Cap Coder, where modular work-heads are fitted around a large diameter starwheel the machine is now suitable for many different types of application including; superglue, hot fill wax, veterinary, household products, foodstuff and nail varnish, to mention a few.
It is often adapted to suit the customers requirements and specifications and may include additional modules to cater for faster filling, quicker capping or special features such as, ball droppers, turnover devices, brush insertion and automatic container feed.
In its basic format, the machine is PLC Controlled, with Human Machine Interface functionality, with a drive servo indexing unit. The unit is mounted below the normal working surface and can be programmed for different indexing speeds and/or different numbers of indexing stations, depending on the products, product fill and application.
The machine can easily handle products from 5ml up to 250ml, with cap sizes up to Ø80mm depending upon the production process required.
Cap Coders `Alphafill` peristaltic pump dispenser is the preferred filling machine, but other suitable filling machines can be supplied to suit the filling medium, and/or existing filling machines can be integrated into the control system.
It is normally supplied with either Cap Coders Single Mk VI Torque head screw-capping head or for higher production rates, Cap Coders Twin Swing MKVI Torque Head, but other options are available.
It is generally fitted with a small 2m conveyor for the infeed and outfeed of the products, with longer lengths available and if suitable it can be supplied to suit a customers existing slat conveyor.
The machine can be supplied suitable for use in Hazardous Environments, complete with the necessary documentation for use in a Zone 2, Atex Environment and even Zone 1, Atex Environment using an all pneumatic control and operating system. There are also options for Validation Documentation, including HATS & SATS, DSERA, GMP and GAMP.
Ancillary equipment can also be supplied, including feeding and collating rotary tables and hopper/elevators for bulk supply.
Features:
Multi function machine, designed to accept modular work stations
Fully automatic PLC control with simple Human Machine Interface
Servo Index drive
Supplied with Cap Coders `Alphafill` peristaltic pump as standard filling option
Customised to suit the application
Applications:
Screw caps, including; Tamper Evident, Child Resistant, Trigger Spray, pump action, jam-jar
Press-on caps
Clean room/food environments
Hazardous environments
CC560 Automatic Capping Machine:
The CC560 Starwheel based Capping Machine is Cap Coders biggest selling machine. It has developed over the years from a simple pneumatic online cap tightening machine, to a sophisticated, PLC controlled unit, that is still simple to use.
In its basic format, the capping machine is supplied with a drive servo indexing unit, mounted above the working area, allowing the machine to be easily installed onto customers conveyors with minimal disruption to the existing line set up. The indexing unit can be programmed for different indexing speeds and/or different numbers of indexing stations, depending on the products, product fill and application. This enables the machine to handle small containers from around 50ml capacity using a 16 pocket starwheel, to 5 litre containers using a 4 pocket starwheel.
More recently developed is Cap CodersAdjustable Starwheel , which can handle products in the range of Ø25mm to Ø80mm, thus minimising the number of change parts required. This is ideal for contract packers or customers with a varied range of products.
The machine is PLC controlled, using and Allen Bradley `Micrologix 1500` PLC, but alternative control systems can be offered.
Thanks to Cap Coders experience and expertise in capping, it has developed theCC720 MK VI Torque Head, which is ideal for use in the CC560 machine. The torque head is generally supplied with an electric motor, which can be controlled with Speed and Torque potentiometers to give the desired torque, accurately and consistently.
The torque head can be supplied in different formats to suit the customers design specifications and requirements, examples as follows:
Single head cap tightening, the most basic format, where pre-placed/pre-started caps are tightened to the required torque
Twin head cap tightening, similar to the above, but the starwheel is indexed two positions at a time, before the torque head act in unison to tighten caps two at a time for faster production rates
Single head automatic capping, where the caps are picked form a cap transfer system and automatically applied to the container
Rotary swing head automatic capping, similar to the above, but operates so that whilst one head is screwing a cap on, the other is picking a cap in preparation.
It is often adapted to suit the customers requirements and specifications which may include, trigger spray applications where the trigger needs to be tightened and oriented to the alignment of the container or supplied with all stainless steel frame-work, due to corrosive elements of the filling medium. The machine can also be interfaced with Cap Coders `Gentle Touch` coder for bottom/top coding.
A Vibratory Bowl feeder is normally used for presenting the caps to torque heads when automatically capping. As an alternative, particularly useful where several different cap sizes are required, Cap Coder can offer a Rotary Feed table to supply the caps.
The machine can be supplied suitable for use in Hazardous Environments, complete with the necessary documentation for use in a Zone 2, Atex Environment. There are also options for Validation Documentation, including HATS & SATS, DSERA, GMP and GAMP.
Ancillary equipment can also be supplied, including conveyors, feeding and collating rotary tables and hopper/elevators for bulk supply.
Features:
Starwheel based, with overhead indexing drive servo motor
Twin Tri-Torque Capping Heads.
Fully automatic PLC control
Options for different capping modes
Installed over existing conveyor
Customised to suit the application
Applications:
Screw caps, including; Tamper Evident, Child Resistant, Trigger Spray, pump action, jam-jar
Press-on caps
Clean room/food environments
Hazardous environments
CC570 Automatic Cap Tightening Machine:
The CC570 is Cap Coder`s new in-line Cap Tightening Machine, using a simple plc controlled gating system.
The capping machine is conveyor based and can be easily installed onto customers conveyors with minimal disruption to the existing line set up. A built-in conveyor can also be supplied if required. Production rates of up to 40 units per minute are achieveable depending on product size.
This machine is ideal for all applications including contract packing, cosmetics, pharmaceuticals, household goods etc.
The machine is also adaptable for press-on caps, ROPP capping and filling operations using peristaltic and volumetric fillers.
The machine is controlled by a Mitsubishi FX1S plc.
Thanks to Cap Coders experience and expertise in capping, it has developed theCC720 MK VI Torque Head , which is ideal for use in the CC570 machine. The torque head is generally supplied with an electric motor, which is controlled with Speed and Torque potentiometers to give the desired torque, accurately and consistently.
The machine can be supplied suitable for use in Hazardous Environments, complete with the necessary documentation for use in a Zone 2, Atex Environment. There are also options for Validation Documentation, including HATS & SATS, DSERA, GMP and GAMP.
Ancillary equipment can also be supplied, including conveyors and feeding and collating rotary tables.
Features:
On-line with simple gating.
Mk.VI Capping Head.
Fully automatic PLC control
Options for cap pressing and ROPP
Installed over existing conveyor
Customised to suit the application
Applications:
Screw caps, including; tamper evident, child resistant, pump action, jam-jar
Press-on caps
ROPP caps
Clean room/food environments
Hazardous environments
CC1170 Filling and Cap Tightening Machine:
The CC1170 machine is a semi-automatic, stand alone, filling and cap tightening machine, supplied with a rotary table for the automatic infeed of containers, typically for products from 10ml to 200ml capacity. It has been specifically designed to be self-contained and provided with lockable castors making it easily moveable between work areas to give greater flexibility to the user.
Initially developed for the pharmaceutical and cosmetic industries, it has proved very popular in other sectors, including diagnostic, complimentary medicines and contract packers.
One of the main objectives in the design of this machine is to provide a user friendly unit, which can be easily operated by one person, at a speed suitable for the operator.
The simple to use, PLC controlled machine is supplied with an infeed rotary table automatically feeding containers into the pockets of a starwheel, before being indexed to the working stations by an electro servo drive motor.
The first station is the filling position, where the containers are filled, generally using Cap Coders Alphafill, Peristaltic pump dispenser, interfaced to the control system. Alternative Filling machines can be offered, depending on the product being filled and customers preferences.
After filling, the starwheel continues indexing allowing the operator to pre-place/pre-start the caps to the containers before entering the capping station. There are program options that allow the machine to stop at intervals for the operator to apply the caps in a more relaxed manner. This is particularly useful for training purposes or if caps are difficult to locate onto the container.
At the capping position, one of Cap Coders CC720 MK VI -Tri-torque Heads, fitted with rubber-lined gripping jaws, is employed to descend, grip the cap and tighten it to the container. For round containers, a rubber-lined clamp assembly is employed to hold the container as the torque is applied.
After capping, the containers continue to index and are cammed from the starwheel into the outfeed collating area.
The machine can be supplied suitable for use in Hazardous Environments, complete with the necessary documentation for use in a Zone 2, Atex Environment.
There are also options for Validation Documentation, including HATS & SATS, DSERA, GMP and GAMP.
Features:
Single operator use
Fully automatic PLC control
Servo index drive
Supplied with Cap Coders `Alphafill` peristaltic pump as standard filling option
Integrated rotary table feed
Easy product changeover
Applications:
Screw caps, including; Tamper Evident, Child Resistant, Trigger Spray, pump action, jam-jar
Press-on caps
Clean room/food environments
Hazardous environments
CC1150 Bench Top Filling and Cap Tightening Machine:
A portable self contained filling and cap tightening machine for cosmetic and pharmaceutical containers. Easy and simple to use.
Can be supplied as all pneumatic or PLC controlled versions. Filling and capping programs are selectable.
Products are placed into a starwheel pocket or can be fed from a rotary table. The machine can run continously or set to a pre-determined number to allow for a pause between filling and applying the caps.
Inexpensive change parts, starwheel, fence and jaws can be changed in a few minutes. Easily adjusted for different heights.
Tightens a wide range of caps including pump action, tamper evident and child resistant closues.
Uses rubber lined gripping jaws for damage free tightening.
Features:
Pneumatic or PLC control
Unique gripping jaw torque head
Customised to suit any applicaion
Easy product changeover
Applications:
Pharmaceutical products
Diagnostic products
Screw on caps
Tamper resistant caps
Vial crimp products
CC720 Torque Head:
A Modular torque head available in different versions to suit the application of the user.
The torque heads can be provided with electric or pneumatic motors, and supplied with
full Atex Certification for use in hazardous areas.
Change part gripping jaws are supplied to suit each cap size, and rubber-lined to
give excellent grip and avoid damage to the product.
The torque heads can be provided with electric or pneumatic motors, and supplied with
full Atex Certification for use in hazardous areas.
Change part gripping jaws are supplied to suit each cap size, and rubber-lined to
give excellent grip and avoid damage to the product.
At the heart of every Cap Coder Capping Machine is the CC720 Torque Head.
Since its introduction, over 25 years ago, the CC720 has undergone several changes,
but the fundamental method of the gripping jaw technology has remained the same.
Since its introduction, over 25 years ago, the CC720 has undergone several changes,
but the fundamental method of the gripping jaw technology has remained the same.
In its latest version, the MK VI, it has evolved into a high specification torque head.
All of the components are fully machined to precise tolerances to achieve the aim of accurate
and consistent torque values now required in modern machines and working environments.
All of the components are fully machined to precise tolerances to achieve the aim of accurate
and consistent torque values now required in modern machines and working environments.
Cap Coder can supply the CC720 in various formats, either incorporated in one of its range of machines,
or by itself for the customer to install into their own equipment.
or by itself for the customer to install into their own equipment.
In general, the torque heads can cater for various styles of screw caps, from Ø10mm to Ø120mm,
and have the capability to handle most types of caps available, including; child resistant,
tamper evident, pump-action spouted, jerry-can ribbed caps and even trigger-spray caps.
and have the capability to handle most types of caps available, including; child resistant,
tamper evident, pump-action spouted, jerry-can ribbed caps and even trigger-spray caps.
As mentioned, the units themselves are available in different formats, with each format
available in different variations to suit the customer`s needs and requirements,
(for full details, see the Technical Specifications Sheets).
available in different variations to suit the customer`s needs and requirements,
(for full details, see the Technical Specifications Sheets).
Cap Coder is willing to work with its customers to supply the unit most suitable for their application,
and can provide additional items where applicable.
This may include Orientation heads for trigger spray applications or the inclusion of a transducer, for measuring torque values.
If required, separate control modules, (both PLC and pneumatic logic), can also be included.
Advice and assistance can also be supplied with the integration to the main operating system of the machine.
and can provide additional items where applicable.
This may include Orientation heads for trigger spray applications or the inclusion of a transducer, for measuring torque values.
If required, separate control modules, (both PLC and pneumatic logic), can also be included.
Advice and assistance can also be supplied with the integration to the main operating system of the machine.
The torque heads are all CE marked and supplied with Certificates of Incorporation and where necessary,
all pneumatic versions can be supplied, suitable for use in Zone 1 and Zone 2, Atex Environments.
all pneumatic versions can be supplied, suitable for use in Zone 1 and Zone 2, Atex Environments.
Features:
Eliminates repetitive strain injury (RSI).
2 or 3 per head gripping jaws. to suit.
Electric or Pneumatic motors.
Single or Multi-head options.
Options for Torque read-out
Options for control systems.
Applications:
All screw cap types, including tamper evident, child resistant, trigger spray, pump action, jam-jar, chef`s hat.
Press-on caps.
Clean room, food environments.
Hazardous environments.
CC720 Basic Torque Head:
The basic unit also known as the `No Rise and Fall Torque Head`, comprises of a driven rotor assembly and gripping jaws.
This allows the customer to control the vertical movement of the torque head and can therefore be used simply for cap tigtening or for `pick and place` operations.
The standard unit is supplied with an electric servo motor which allows independent control of the speed and torque within accurate limits.
A pneumatic motor option allows for the torque head to be used in Zone 1, Hazardous Environments, and can be supplied with the necessary ATEX Certification.
2-Jaw or 3-Jaw versions of the Rotor assembly are available, depending on the application.
Change part rubber lined gripping jaws are available to suit all types of cap, from Ø10mm to Ø120mm, as standard. Other sizes may be available on special order.
Features:
Eliminates repetitive strain injury (RSI).
2 or 3 per head gripping jaws. to suit.
Electric or Pneumatic motors.
Single or Multi-head options.
Applications:
All screw cap types, including tamper evident, child resistant, trigger spray, pump action, jam-jar, chef`s hat.
Clean room, food environments.
Hazardous environments.
CC720 2 position `Rise and Fall` Torque Head:
This is the ideal Torque Head for the cap tightening process. Using Cap Coders Unique gripping jaws system in conjunction with rise and fall cylinders it is the perfect unit for tightening pre-placed/pre-started caps of all shapes and sizes.
The cylinder stroke length is determined by the cap height; keeping the cylinder stroke to a minimum allows higher production rates to be achieved.
The standard unit is supplied with an electric servo motor which allows independent control of the speed and torque within accurate limits.
A pneumatic motor option allows for the torque head to be used in Zone 1, Hazardous Environments, and can be supplied with the necessary ATEX Certification.
2-Jaw or 3-Jaw versions of the Rotor assembly are available, depending on the application.
Change part rubber lined gripping jaws are available to suit all types of cap, from Ø10mm to Ø120mm, as standard. Other sizes may be available on special order.
| Features: Eliminates repetitive strain injury (RSI). 2 or 3 per head gripping jaws. to suit. Electric or Pneumatic motors. Single or Multi-head options. Options for torque read-out. Options for control systems. Applications: All screw cap types, including tamper evident, child resistant, trigger spray, pump action, jam-jar, chef`s hat. Press-on caps. Clean room/food environments. Hazardous environments. |
CC720 3 position `Pick and Place` Torque Head:
This Torque Head is used for most automatic capping processes. Using Cap Coders Unique gripping jaws system in conjunction with two cylinders connected in tandem, for the purpose of picking the cap up before applying it to the container.
The stroke length of each cylinder is selected to suit the cap height and the presentation device; keeping the cylinder strokes to a minimum allows higher production rates to be achieved.
In operation, the Torque head descends from its `Start` position, utilising the upper cylinder, with the jaws open to the `Mid` position, where the cap is presented. The jaws grip the cap and retract to the `Start` position to allow the presentation device to move away. The head then descends fully, using both upper and lower cylinders, to screw the cap on. When the desired torque is achieved, the jaws release the cap and the head fully retracts to the `Start` position.
The standard unit is supplied with an electric servo motor which allows independent control of Speed and Torque within accurate limits.
A pneumatic motor option allows for the torque head to be used in Zone 1, Hazardous Environments, and can be supplied with the necessary ATEX Certification.
2-Jaw or 3-Jaw versions of the Rotor assembly are available, depending on the application.
Change part rubber lined gripping jaws are available to suit all types of cap, from Ø10mm to Ø120mm, as standard. Other sizes may be available on special order.
Features:
Eliminates repetitive strain injury (RSI)
2 or 3 per head gripping jaws. to suit.
Electric or Pneumatic motors.
Single or Multi-head options.
Options for torque read-out.
Options for control systems.
Applications:
Most screw cap types, including; tamper evident, child resistant, trigger spray, pump action, jam-jar, chef`s hat.
Press-on caps.
Clean room/food environments.
Hazardous environments.
CC720 Rotary Twin Torque Head:
This Torque Head is used to give faster speeds in the automatic capping process. Two standard torque heads are mounted either side of a rotary actuator. Using Cap Coders Unique gripping jaws system in conjunction with the actuator, the torque heads function, so that whilst one head is screwing a cap on, the other is picking a cap up, before rotating through 180° to repeat the process.
In operation, the Torque head descends from its upper position, one set of jaws gripping a previously picked cap, the other set open ready to pick a cap from the transfer device. The head then descends fully, the one set screwing the cap on and the other set closing around the next cap. When the desired torque is achieved, the jaws release the screwed on cap and the head fully retracts to the upper position. The twin heads then rotate 180° ready for the next application.
The standard twin unit is supplied with two electric servo motors with independent control of Speed and Torque within accurate limits.
2-Jaw or 3-Jaw versions of the Rotor assembly are available, depending on the application.
Change part rubber lined gripping jaws are available to suit all types of cap, from Ø10mm to Ø80mm, as standard. Other sizes may be available on special order.
Features:
Eliminates repetitive strain injury (RSI)
2 or 3 per head gripping jaws. to suit.
Electric or Pneumatic motors.
Options for torque read-out.
Options for control systems.
Applications:
Most screw cap types, including; tamper evident, child resistant, trigger spray, pump action, jam-jar, chef`s hat.
Press-on caps.
Clean room/food environments.
Hazardous environments.
CC550 Automatic Capping Machine:
A cost effective automatic starwheel based Capping Machine, that can be used in conjunction with your existing slat conveyor. Handles products typically in the 25ml to 1litre range. Easy torque adjustment. Can be used for screw on caps or push on caps. Will tighten caps at 40 per minute. Optional bottom coding.
Caps can be fed automatically by bowl feeders, or placed by hand.
All peumatic operation or PLC controlled with servo indexing, and either electric or pneumatic capping.
Conveyor can be interlocked to external filler and labeller. Simple installation, inexpensive change parts, starwheel, fence and jaws can be changed in a few minutes.
Features:
Starwheel based.
Fully automatic pneumatic or PLC control
Installed over existing conveyor
Customised to suit any applicaion
Conveyor infeed & outfeed
Applications:
Pharmaceutical products
Food products
Screw on caps
Press on caps
CC1450 Bench Top Cap Tightening Machine:
The CC1450 Machine is one of the newest developments of Cap Coder. Designed to be inexpensive with minimal change parts, using adjustable guides and clamp pads to accommodate a wide range of products from 50ml to 5litre capacity. It incorporates Cap Coders latest MK VI Torque Head, using rubber-lined change part gripping jaws, to give accurate and consistent torque values.
Designed to be flexible and accommodate customer`s needs and requirements, it is available in different versions, as detailed below;
PLC controlled and electro-pneumatically operated.
Pneumatically controlled and operated.
Trigger spray Applications. The PLC controlled version of the CC1450 can be supplied with an `Orientation` style Torque head, to screw on trigger spray caps and turn the trigger section of the cap to the correct orientation of the container.
Un-tightening Application. With his variation, not only can caps be tightened, but unscrewed as well. Using a reversible motor, a simple switch will change the method of operation.
Different products are easily catered for using the adjustable guides and clamp pads for round containers, allowing changeovers to be carried out in less than 10 minutes.
The machine can be supplied suitable for use in Hazardous Environments, complete with the necessary documentation for use in a Zone 2, Atex Environment and even Zone 1, Atex Environment using an all pneumatic control and operating system.
There are also options for Validation Documentation, including HATS & SATS, DSERA, GMP and GAMP.
Features:
PLC Controlled, with options for pneumatic control
Electric or pneumatic motors
Simple to use
Easy set up and product changeover
Applications:
All Screw cap types, including; Tamper Evident, Child Resistant, Trigger Spray, pump action, jam-jar, chef`s hat
Press-on caps
Clean room/food environments
Hazardous environments
CC1100 Bench Top Cap Tightening Machine:
A bench top cap tightening machine for cosmetic and pharmaceutical containers. Easy and simple to use.
Products are placed into an indexing pocket or Starwheel.
Inexpensive change parts, starwheel, fence and jaws can be changed in a few minutes. Easily adjusted for different heights.
Tightens a wide range of caps including pump action, tamper evident and child resistant closues.
Uses rubber lined gripping jaws for damage free tightening.
Features:
All pneumatic operation
Unique gripping jaw torque head
Customised to suit any applicaion
Easy product changeover
Applications:
Pharmaceutical products
Diagnostic products
Screw on caps
Tamper resistant caps
Pump spray products
CC 1440 Bench Top Cap Tightening Machine:
The CC1440 Machine is one of the original Cap Coder developments to assist the `start up` companies, who needed to reduce the risks of RSR, but with a minimal cost implication. It was originally designed as an all pneumatic machine, (particularly useful in Hazardous Environments), for small shaped containers up to 5 Litre jerry-can type containers. It is supplied with one of Cap Coders CC720 MK V Torque heads, using rubber-lined change part gripping jaws, to give accurate and consistent torque values.
Over the years, due to Cap Coders ability to respond to customers` needs and requirements, it is now available in several different versions, namely;
Manual Infeed - PLC controlled and electro-pneumatically operated or pneumatically controlled and operated. For shaped containers up to 5 Litre containers, (not suitable for round containers).
Powered Infeed - PLC controlled and electro-pneumatically operated, or pneumatically controlled and operated. Suitable for small round and shaped containers, up to 1 Litre capacity containers. The machine can be supplied with an adaptor piece to convert the machine to Manual Infeed, as above to allow 5 Litre containers to be handled. Supplied with a single `Start` button as standard, with options for a two handed `Start` version.
Trigger spray Applications - either of the above two machines can be supplied with an `Orientation` style Torque head, to screw on trigger spray caps and turn the trigger section of the cap to the correct orientation of the container.
Press on Caps - For use to press home pre-placed caps. A simple press head unit replaces the torque head.
Un-tightening Application - With this variation, not only can caps be tightened, but unscrewed as well. Using a reversible motor, a simple switch will change the method of operation. Alternatively, it can be part of the operating sequence; this is particularly useful for laboratories where the filling media requires analysis. The machine unscrews the cap to allow the operator to remove the test sample, before putting it back into the machine for screwing the cap back on.
Different products are easily catered for using simple change parts, allowing changeovers to be carried out in less than 10 minutes.
The machine can be supplied suitable for use in Hazardous Environments, complete with the necessary documentation for use in a Zone 2, Atex Environment and even Zone 1, Atex Environment using an all pneumatic control and operating system.
There are also options for Validation Documentation, including HATS & SATS, DSERA, GMP and GAMP.
Features:
PLC Controlled, with options for pneumatic control
Electric or pneumatic motors
Simple to use
Easy set up and product changeover
Powered infeed and clamping system
Applications:
All Screw cap types, including; Tamper Evident, Child Resistant, Trigger Spray, pump action, jam-jar, chef`s hat
Press-on caps
Clean room/food environments
Hazardous environments
CC1700 Automatic Capping Machine:
A in-line capping machine, that can be used in conjunction with your existing slat conveyor. Handles products typically in the 1 litre to 10 litre range. Easy torque adjustment. Cap pick and place staion available. Will tighten caps at 40 per minute.
Caps can be fed automatically by bowl feeders, or placed by hand.
All peumatic operation or PLC controlled, and either electric or pneumatic capping.
Conveyor can be interlocked to external filler and labeller. Simple installation, inexpensive change parts, product gating and jaws can be changed in a few minutes.
Features:
Product controlled by gating.
Fully automatic pneumatic or PLC control
Installed over existing conveyor
Customised to suit any applicaion
Conveyor infeed & outfeed
Applications:
Pharmaceutical products
Food products
Screw on caps
Press on caps
About Cap Coder.
Cap Coder, based in Chalgrove near Oxford, was established over 30 years ago as a designer and
manufacturer of equipment for the packaging industry.
We are a dedicated engineering company, designing and manufacturing standard and bespoke solutions
to a range of capping and coding applications.
Cap Coder has a strong customer base, both in the UK and overseas, founded on integrity, experience and understanding.
The Company has a programme of continuous investment in design and organisation to meet the challenges
of the changing requirements within the packaging industry.
This allows Cap Coder to speedily provide competitive solutions to our customer`s capping and coding requirements,
and to maintain the highest level of support to existing customers in the provision of change parts, spares and technical advice.
Cap Coder will continue to innovate, to meet the changing needs of its customers and in the development of new products.
Cap Coder is an ISO 9001:2000 registered company.
