Cip Machineries Pvt. Ltd
Colloid Mill
Product Specifications
Product Description
R & D COLLOID MILL:
Technical Specification:
|
|
* Depending upon the material
|
R & D COLLOID MILL:
Salient Features:
|
1.
|
All contact parts are made out of S. S. 304 (S.S.316 on demand at extra charges).
|
|
2.
|
Coupling provided between motor shaft and rotor shaft for ease in maintenance.
|
|
3.
|
Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.
|
|
4.
|
Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product.
|
|
5.
|
Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.
|
|
6.
|
Leak proof neoprene sealing device.
|
|
7.
|
Three-way cock for draining and recirculation of liquids provided as standard. Extra discharge spout provided as a standard for viscous products.
|
|
8.
|
DOL starter with overload relay for protection against single phasing and low voltages.
|
|
9.
|
Contact parts can be easily dismantled for cleaning.
|
|
10.
|
Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation.
|
|
11.
|
Flameproof motor and flameproof rotary switch can be provided on request at extra cost.
|
About Us:
Our Roots
Since the humble beginning the company has profoundly grown in the span of time and has successfully created CIP image . Mr. Subhash P. Patel chairman & managing director and Mr. Sunny V. Patel joint managing director, are managing the company affairs by giving correct direction and guidance to the team members. Today, CIP is a leading name in both Indian and international market as its products are preferred again and again by its clients. Pharmaceutical machineries provided by CIP are of consistent quality and are a best example of engineering excellence. CIP has an entire range of machines for making tablets, liquids and ointment to cater to the requirements of a small pharmaceutical company to the large multinational company. "We matter that is why we exist" suits best for us.
Quality
CIP Machineries has become the first pharmaceutical machinery manufacturing company in India to achieve the ISO-9002 standard which has been certified by the SGS, Europe on an entire section basis. Our products speak about our quality. Achieving this standard is a step towards the systematic and documented work culture in this organization. In the era of globalization where quality is must and foremost, CIP stands out from the rest.
Environment
CIP Machineries is highly concerned about the health of the masses. And for a healthy life, healthy environment is a must. CIP is an environment friendly industry that takes care about the Mother Nature. Hence, it takes utmost care to provide a pollution-free atmosphere. We can say _ "CIP conforms to the environmental norms."
Safety
The European Commission refers to the CE Marking of products as a "passport" which can allow a manufacturer to freely circulate their products within the European marketplace. The marking applies only to products regulated by the European Commissions health, safety and environmental protection legislation (product directives) but this is estimated to include more than 50% of the goods currently exported from the U.S. to Europe. All other consumer products are subject to the requirements of the General Product Safety Directive 92/59/EC, which does not require the CE-mark.
The actual CE Marking is the letters "CE" which a manufacturer affixes to certain products for access to the European market (consisting of 18 countries and also referred to as the European Economic Area or EEA). The letters "CE` are an abbreviation of a French phrase "Conformite Europeene". The marking indicates that the manufacturer has conformed with all the obligations required by the legislation. Initially, the phrase was "CE Mark": however, "CE Marking" was legislated as its replacement in 1993.
The actual CE Marking is the letters "CE" which a manufacturer affixes to certain products for access to the European market (consisting of 18 countries and also referred to as the European Economic Area or EEA). The letters "CE` are an abbreviation of a French phrase "Conformite Europeene". The marking indicates that the manufacturer has conformed with all the obligations required by the legislation. Initially, the phrase was "CE Mark": however, "CE Marking" was legislated as its replacement in 1993.
The Global Reach
With the advent of many new developments in the field over the time, the company has not only proved to be an unchallenged import substitute to the domestic market, but has also established itself as an excellent brand image in several developed and developing countries across the globe.
